Peanut machine is the main product of our company. We have been asking ourselves to recommend products of high quality and low price to consumers, and introduce the top ten precautions for using peanut machinery:
1. Check whether the fastener is tightened, whether the rotating part is flexible, whether there is grease in each bearing, and whether the sheller is placed on a stationary ground.
2. To check the power supply voltage, the switch must be in a disconnection position.
3. After the motor starts, the steering of the rotor shall be in accordance with the direction indicated on the machine tool. After a few minutes, observe the abnormal noise, and when the operation is normal, the peanut can be fed.
4, peanuts, feeding, uniform, right amount, do not contain iron, stone and other sundry, lest cause mechanical broken peanuts or accident. When the peanuts covered with sieve surface, can open out the mouth switch.
5. When peanut shells are increased in peanuts, the motor can be moved down to tighten fan belt and blow up air volume.
6. When operating, do not stand on the side of the belt to avoid hurting people.
7. When the machine is ready to be used, it should eliminate the dirt and dirt of its appearance and the remaining seeds and other sundries. The machine should be covered in a dry storage room to avoid the sun and rain.
Remove the transmission belt and remove it for further storage.
9. Select the bearings with diesel oil and dry them with grease.
10. Maintain sufficient lubricating grease in the driving part and bearing room and regularly clean and replace it.
