Maintenance Method Of Peanut Peeling Machine
Peanut peeling machine adopts triangle belt transmission. The new band in use after a period of time, due to the tension and elongation will gradually loosen and the gap so to regularly check the transmission belt tension and the matching position is appropriate, timely adjustment. During the operation, should always pay attention to speed, sound, temperature of the machine whether it is normal. Take off a variety or a day job is completed, should be down to check whether all the bearing overheating, fastening screws, key pin parts is loose, if loose fastening should be found at any time, especially high speed parts, such as: the fan blade, especially the fan blade is worn or fracture, external reinforcement plate is worn or deformed, if found to timely repair or replacement of the screen body. All living section of the lifting shaft and bearing should be timely check there is no shortage of oil wear The phenomenon, once the timely replacement of gas. Each time after the operation, rubbing fruit machine sieve bottom plate, namely scale slot timing with a wire brush for cleaning. The processing of the machine after the end of the season, a big check. Check the bearing operation and wear; check whether there is a sieve bottom deformation or crack check the wear; separating sieve. After the inspection, the damaged part of the repair, remove dirt and residue in the machinery. The peanut peanut shelling machine after use, remove the belt machine, placed in dry warehouse storage. Remove the belt to be hung on the indoor wall is not the sun.
